SMALL OBJECT. YOUR SIGNATURE. Make your pick. Shape the feel. Bring your artwork.
01 Shape & feel mm Pick preset Balanced · 26 × 30 / 1.2 mm Compact lead · 23 × 27 / 1.5 mm Light strum · 27 × 31 / 0.8 mm Round tip · 28 × 31 / 1.2 mm Custom
Flat perimeter on the bed, rounded shoulders, and a smooth upper bevel. Presets are starting points; material and thickness change the feel.
02 Your artwork front face Front artwork Back artwork
Each face has its own image and placement. The back is shown as you would see it after turning the pick over.
↥ Bring an image Drop here or choose PNG, JPEG, WebP Wave study Sample artwork · try your own
× Invert image tones Center image
0.4 mm nozzle cleanup 0.2 mm nozzle cleanup Cleanup off
Optional cleanup removes tiny color islands and narrow strokes; it does not thicken them. The width filter is approximate and applies to this face. Choose a cutoff near your slicer’s line width, then check the sliced result.
No artwork cleanup applied.
In Face / place view, drag the image or use arrow keys. Transparent pixels stay empty when tones are inverted.
Geometry & printing notes For front-only artwork, start with a flat print, artwork facing up, 100% infill, and at least two perimeters. A 0.10 mm layer height is a useful starting point for the default 0.20 mm recess and colored layer. Check the sliced heights and finish the playing edge if needed.
Back artwork creates downward-facing recesses. Inspect the first layers and any bridging or support in your slicer; two-sided detail needs more care than a plain underside.
A continuous core of at least 0.30 mm is kept between the two faces, even where artwork overlaps. Recess and colored-layer thickness are limited automatically to fit the body. Artwork is kept clear of the bevel and playing tip.
3MF contains one named part per used color in one assembly, in millimetres. Assign each part to a filament in your slicer; automatic color assignment varies by slicer. This is intended for multi-material printing. For separate STLs, import all parts together as parts of one object and keep their original positions.
There is no universally best pick. Print a few thicknesses and compare. Guidance: Prusa’s printed-pick guide ↗ and Dunlop on tip shapes ↗ .
MODEL GEOMETRY · NOT SLICED TOOLPATHS
A little more personal. Face / place 3D view Fit
FRONT FACE / ARTWORK PLACEMENT 26 × 30 mm
PICK THICKNESS 1.20 mm
DETAIL SETBACK 0.20 mm
MINIMUM CORE 0.80 mm
FROM IMAGE TO INSTRUMENT Two colors. One pick. Aligned color parts, with artwork on either face.
Download 3MF ↗ STL bundle ↓
Bambu Studio: This is a geometry-only 3MF, with no printer or process profile. If you see “invalid config, load geometry data only,” continue with geometry-only import and assign filaments to the named parts. Alternatively, download the STL bundle and import all files together as one object with multiple parts. About this warning ↗
Made for experimenting. All dimensions in millimetres.